Resincoat Garage Wall Coating

Resincoat Garage Wall Coating is a one pack acrylic coating. Due to its highly durable properties it is perfect for use on interior walls that are prone to dust build up. The paint can be easily applied to breeze blocks but also works well on brick walls and clay or gypsum walls and surfaces. Please note that coverage may differ on breeze block walls as different types of breeze blocks can have different levels of porosity. Testing a small area first may help you gauge the correct level of coverage for your application specifically.

Unlike many of our epoxy products this is a one pack system which means the product does not require mixing together before use, it is ready to go straight out of the tin which makes application incredibly simple. Using a roller or brush simply apply the paint to your walls and leave to dry for 4 hours. Two coats are ideal to create a tough, plastic-like finish that will stand the test of time and leave your garage looking superb.

​

2.5L - 15 - 20 sqm
5L - 30 - 40 sqm
10L - 60 - 80 sqm

*It is critical to note that coverage may differ on breeze block surfaces due to the different levels of porosity. These substrates may require more product however it is important that the product be applied thinly on each coat.

Preparation:

Do not apply this product in damp conditions or if temperature is below 10°C.

Non Painted Wood - Sand the surface thoroughly and seal any knots or inconsistencies prior to application. Vacuum away any sanding dust and wipe the surface with a suitable cleaner such as white spirit and allow to fully dry.

Bare Concrete, Brick or Stone - Use a wire brush to remove any dirt from the surface of your wall. Most concrete or other monolithic surfaces require no primer before application of Resincoat Garage Wall Paint. For other surfaces check with our technical team before use.

Previously Painted Surfaces - Remove all loose or flaking paint using a wire brush then thoroughly sand the surface. Vacuum away any sanding dust and then clean any grease, oil or dirt with white spirit or similar cleaning product. Allow to dry before application of paint.

Application:
Before application of this product we advise testing a small area first may help you gauge the correct level of coverage for your application specifically.

It is important to note when applying this product to always apply a thin layer.

1. Stir the paint thoroughly before use
2. Apply by brush or roller (when using more than one tin, Resincoat recommend you intermix into a larger scuttle or bucket before use to ensure an even colour)
3. Apply a minimum of 2 coats (allowing 4 - 6 hours between coats)