Resincoat HB Epoxy Garage Floor Paint

Our Epoxy Garage Floor Paint is the number one choice for concrete floor paints in the UK as it protects and seals whilst offering an attractive, decorative, professional finish. This product is part of the Resincoat High Build Epoxy Range, heavy-duty, solvent free epoxy floor coatings, possessing exceptional abrasion and chemical resistance. We proudly manufacture all our resin products and floor paints in the UK, guaranteeing the highest quality finish. Buy in confidence from Resincoat an ISO 9001 accredited company.

Two coats of Resincoat HB Epoxy Garage Floor Paint can provide the equivalent of ten coats of conventional coatings containing solvent or water based epoxy products. Our floor paint is the perfect choice for your garage or car service centre as it is oil tolerant as well as being resistant to any other automotive fluid that would ruin standard paints.

If you're looking for a coating with slip resistance visit our Anti Slip Epoxy Floor Coating page.

Please see below for coverage rates. If you are coating a large area and would like expert advice please call our team who will be happy to assist you.

1kg: 3-4m²
2.5kg: 8-10m²
5kg: 17 – 20m²
10kg: 35-40m²

Please note the above coverage rates are per coat, we always advise 2 coats.

Preparation:
Before applying our garage floor paint we advise that you vacuum the area. Old paint finishes should be removed if flaking at all and if well bonded abraded sanded to create texture prior to applying the paint. Preparing the floor mechanically (shot blasting or grinding) is always advisable but if that is not possible our Etch and Clean is a good alternative.

Please see below for the best primer for your floor:
• For new concrete floors prime with Resincoat Damp Tolerant Primer
• For dusty or old floors prime with Resincoat Deep Penetrating Primer
• For greasy floors with oil residue clean thoroughly scraping off any dust or dirt and prime with Resincoat Oil Tolerant Primer

For wood floors you should consider use of Resincoat Wood Floor Paint.

Application:
We advise when applying this product the ambient temperature is at least 7°C. Please note for 2 coats you will require 2 epoxy rollers.

1. Pour 100% of your part B tin in to part A
2. Mix resin components together with a drill and paddle for 1 minute
3. Pour content in to a paint scuttle
4. Immediately begin applying your paint with an epoxy roller frame and sleeve
5. Use a brush around the edges for a smooth finish (a second pair of hands comes in useful)
6. Once coat one has been applied leave 12-24 hours then apply second coat
7. Once complete wash equipment in warm soapy water

PLEASE NOTE: The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes. 

Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before becoming unworkable

• This product is NOT UV stable therefore will discolour when exposed to sunlight. Please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.
• This product can NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating. The resin formula is chemically manufactured to work efficiently and effectively based on the exact amounts supplied in full tins for parts A & B
• This product is NOT self levelling.
• If you require a clear epoxy coating visit our clear epoxy product here
• The key factors for product adhesion are:
  • Surface Laitance removal
  • Compressive Strength > 25N/mm2
  • Relative Humidity of <85% for 1 coat or <90% for 2 coats of Damp Tolerant Primer
  • Effective DPM underneath the main slab