Resincoat Epoxy Line Marking Paint

Resincoat Epoxy Line Marking Paint is primarily used for permanent line marking in warehouses and factories, for clear and long lasting demarcation. This coating can also be used as permanent protection in areas requiring chemical resistance combined with abrasion resistance such as wash boxes, process tanks, silos etc. Due to its high chemical resistance, this epoxy line marking paint is also suitable for lining chemical spillage areas and can be applied vertically onto bund.

Please see below approximate coverage:

2.5kg unit - will create up to 50m lines at 10cm width / 500 microns per coat 

2.5kg unit - will create up to 100m lines at 10cm width / 250 microns /coat

​

 ​

Preparation:

Ensure the surface is clean, dry and free from contamination. Suitable mechanical treatment is the preferred treatment prior to application, as this ensures a mechanical key for the coating. 

Application:

1. Gently mix Part A for 2 minutes.

2. Pour 100% contents of Part B in to Part A and mix with a drill and paddle until homogeneous.

3. Begin applying product to the floor using a brush or roller (for clear and tidy lines we recommend using tape or stencils during application to ensure that no excess is laid).

4. One coat should be sufficient, apply a second coat if desired.  

Due to the engineered viscosity profile, the applied paint will be thin and easy to work with once applied, then rapidly thickens to create a permanent, durable line. 

PLEASE NOTE: The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes.