Resincoat Caravan Paint

Elevate your caravan or mobile home with Resincoat Caravan Paint, the epitome of durability and style in one single pack enamel. This paint combines a stunning high-gloss finish with unparalleled toughness, offering exceptional weather, scratch, and scuff resistance. Its superior flow ensures a flawless application whether you're a DIY enthusiast or a professional, guaranteeing vibrant colour stability and anti-corrosive protection. Resincoat Caravan Paint not only enhances the exterior of your mobile haven but ensures it stands up to the elements and the rigours of the road, keeping your mobile home looking its best on every journey.

*Please note colour may vary in different areas due to surrounding and light reflecting off the coating. If you have any questions regarding this please call our team on 0330 0570 695.

Coverage rates are approximate & depend upon the substrate.

1L- covers up to 11m²

Preparation:

Before applying our coating please ensure the surface is thoroughly cleaned, defects (including rust) made good by sanding and filling where necessary. For the best key we recommend a gentle sand with fine grit paper. Dust, dirty & debris should be removed, before a wipe down with a normal cleaning solvent such as methylated spirit.

Before applying this product your substrate should be suitably primed. We strongly recommend the use of our Caravan Paint Primer.

Application

Brush/Roller:
1. Ensure the surface has been primed with Resincoat Caravan Paint Primer

2. Allow 4 hours for the primer to cure

3. Stir product thoroughly, before and during use 

4. Begin to apply the product using your brush or roller 

5. Allow paint to dry for 24 hours

6. Apply second coat of paint (if required) one coat should be sufficient

7. Leave for 24 hours to dry 

Spray Gun:

1. Ensure the surface has been primed with Resincoat Caravan Paint Primer

2. Allow 4 hours for the primer to cure

3. Follow spray gun manufacturers instructions to thin the coating for the relevant spray system being used. Please note the paint can be thinned up to 10% 

4. Begin to apply the product

5. Allow paint to dry for 24 hours

6. Apply second coat of paint (if required)

7. Leave for 24 hours to dry 

 *Please note it is important to ensure your substrate does not get wet in between coats