Tack Coat | Resincoat
   

Resincoat Tack Coat

2 Review(s) 
Resincoat
PRM073
New

Resincoat tack coat is a resin adhesive primer for use before screeding or prior to use of Resincoat Concrete Repair products. The tack coat will seal the damaged concrete and create a key between existing concrete and repair materials. The Tack Coat will also help prevent any flaking or loose material from interupting the curing process of subsequent repair products.

 

  • Suitable for internal and external applications
  • Easy to apply - DIY friendly
  • Quick cure time
  • Good coverage rates
Size : 2.5Kg
Hurry! only 49246 items left in stock.
£56.09

£46.74 ex VAT.

VAT included
Quantity

Add to Wishlist

Resincoat Tack Coat is an Epoxy Resin adhesive primer for stronger repairs. It is an adhesive primer for use as a bonding aid for subsequent application of Resincoat mortar products. The primer is ideal for use where a stronger bond is required as in more friable surfaces or vertical repairs. Resincoat Tack Coat can be used on damp or dry surfaces at temperatures down to 0°C. Epoxy tack coat can be applied to a range of substrates including concrete, metal, wood, and most other flooring composites. Please contact us with any enquiries regarding other substrate types. 

 

All our resin products are proudly manufactured in the UK using the finest 100% epoxy resin that's solvent free. The tack coat will provide a strong bond for a highly durable long lasting finish. 

Coverage Rates:

1kg - 3 - 4m²

2.5kg - 7 - 10m²

5kg - 14 - 20m²

Application Guide

Preparation:

Before use of this product we recommend where possible to square the repair off then use a wire brush to clean the area then proceed to vacuum the area to get rid of any loose materials, dust and dirt. If it's not possible to square the repair off, use a wire brush to clean the area out & vacuum to remove dust & dirt. 

  

Application Conditions:

Do not apply outside of the range 10 °C to 25 °C. Localised heating or cooling equipment may be required outside this range to achieve ideal temperature conditions.

 

Application:

1. Pour the entire content of part B in to your part A tin

2. Mix thoroughly using a drill & paddle for 2 minutes 

3. Begin to apply the tack coat to your area with a stiff brush working well in to the surface and edges of the repair are

4. Overlaying of subsequent mortar must be done when the product is tacky (6 - 8 hours). If that's not possible the mortar can be applied whilst the tack coat is still wet (approximately 30- 60 minutes at 15ºC - 20ºC but this will be extended to 3 hours at 5ºC)

5. Once complete wash equipment with warm, soapy water

PLEASE NOTE: The pot life of this product is 20 minutes. This means the product will start to chemically cure after this time. Ensure you remove the primer from the tin in this window. The primer will then be workable on your floor for 40 minutes. 

: PRM073
: 49246 Items
Hurry! only 49246 items left in stock.
New

Data sheet

Appearance
Max operating temperature of 60ºC
Composition
Interior or exterior
Substrates
An adhesive primer, quick and easy to use
Product Components
Floor, wall, ramps, steps
Typical Installations
Resincoat Tack Coat should be sufficiently tacky to overlay after approximately 30- 60 minutes at 15ºC - 20ºC but this will be extended to 3 hours at 5ºC.
Re-coat/Foot-traffic Time (at 20°C)
Maximum At 20°C When Decanted Into A Shallow Tray. Higher Temperatures Will Reduce The Pot Life
Pot Life
20 Minutes Maximum At 20°C When Decanted Into A Shallow Tray. Higher Temperatures Will Reduce The Pot Life
Application Tools
Brush

Specific References

UPC
500192071647
EAN13
5056489409426

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package

Reviews

Grade 


Very good

Used this as advised by the technical team before repair of my cracked concrete floor. Achieved a nice finish & the repair went well would use again.

Grade 


Good stuff

Used this in our garage & was very happy. reasonably priced & helped us achieve a nice smooth finish on our floor

Write your review

Resincoat Tack Coat

Resincoat tack coat is a resin adhesive primer for use before screeding or prior to use of Resincoat Concrete Repair products. The tack coat will seal the damaged concrete and create a key between existing concrete and repair materials. The Tack Coat will also help prevent any flaking or loose material from interupting the curing process of subsequent repair products.

 

  • Suitable for internal and external applications
  • Easy to apply - DIY friendly
  • Quick cure time
  • Good coverage rates

Write your review