Resincoat Water Based Paint

Resincoat water based epoxy paint is a two-component coating system that is ideal for a wide range of surfaces such as concrete, wood, metal, and more. This paint is formulated with water-based epoxy resin, which makes it safe and easy to use while also providing good durability and chemical resistance. The water based formula makes it damp tolerant as standard, as well as giving excellent coverage rates.

Resincoat Water Based Epoxy Paint dries to a satin finish that enhances the appearance of any surface and protects it from wear and tear and spills. Whether you're looking to renovate your garage, workshop, or commercial space, Resincoat Water Based Epoxy Paint is an excellent choice for an attractive finish. This paint adheres well to a range of surfaces including concrete, grano, metals and asphalts. Please contact us if you have an enquiry regarding alternative substrate types.

Please see below for coverage rates. If you are coating a large area and would like expert advice please call our team who will be happy to assist you.

1kg: 6-8m²
2.5kg: 15-20m²
5kg: 30-40m²

Please note the above coverage rates are per coat, we always advise 2 coats.

Preparation:
Before applying this coating we advise that you vacuum the area. Old paint finishes should be removed if flaking at all and if well bonded abraded sanded to create texture prior to applying the paint. Preparing the floor mechanically (shot blasting or grinding) is always advisable but if that is not possible our Etch and Clean is a good alternative.

Application:

We advise when applying this product the ambient temperature is at least 7°C. Please note for 2 coats you will require 2 epoxy rollers.

1. Pour 100% of your part B tin in to part A
2. Mix resin components together with a drill and paddle for 1 minute
3. Pour content in to a paint scuttle
4. Immediately begin applying your paint with an epoxy roller frame and sleeve
5. Use a brush around the edges for a smooth finish (a second pair of hands comes in useful)
6. Once coat one has been applied leave 12-24 hours then apply second coat

PLEASE NOTE: The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes.

Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before becoming unworkable

* This product is NOT UV stable therefore will discolour when exposed to sunlight. Please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.
* This product can NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating. The resin formula is chemically manufactured to work efficiently and effectively based on the exact amounts supplied in full tins for parts A & B