Resincoat Epoxy Flake Flooring System

The epoxy flake systems is a strong industrial coating providing high levels of durability ideal for both domestic & industrial use. The flooring would look great in any garage floor, showroom, gym and any other industrial space. Our system makes concrete floors look highly attractive whilst also providing a high quality finish. The base and top coat consist of our best-selling epoxy floor coating proudly manufactured in the UK.

There are two main flakes finishes; full blind & scatter.
Full Blind- complete covering of flakes across the entire surface.
Scatter – a scattering of flakes across your surface.

• 2 coats of HB epoxy floor paint – the base coat for your flake (your choice of colour)
• Blended flakes - enough flakes for either a full blind or scatter finish (your choice of colours)
• Fast Cure Top coat – Premium gloss polyaspartic floor paint
• Application kit – All tools & accessories you will need

• Spiked shoes - one size fits all

Preparation:
Before applying the flake system we advise that you vacuum the area. Old paint finishes should be removed if flaking at all and if well bonded abraded sanded to create texture prior to applying the paint. Preparing the floor mechanically (shot blasting or grinding) is always advisable but if that is not possible our Etch and Clean is a good alternative.

See below for the best primer for your floor:
• For new concrete floors prime with Resincoat Damp Tolerant Primer
• For dusty or old floors prime with Resincoat Deep Penetrating Primer
• For weak concrete floors prime with Resincoat Stabilising Primer
• For greasy floors with oil residue clean thoroughly scraping off any dust or dirt and prime with Resincoat Oil Tolerant Primer

Application:
• Begin with your base coat – mix part A for a minute then add 100% of part B
• Mix first coat of our epoxy floor paint together with a drill & paddle for at least 1 minute
• Pour contents in to a paint scuttle
• Immediately begin painting your floor using an epoxy roller - use a brush around the edges for a smooth finish (a second pair of hands comes in useful)
• Once you have applied coat 1 leave to cure until touch dry approximately 12-24 hours
• Repeat the process to apply your second coat
• Apply flakes when the paint is still wet
• Depending upon required finish either sprinkle ad hoc or full blind
• Leave the coating to cure until touch dry then brush off excess flakes
• Seal with clear top coat – mix part A for a minute then add 100% of part B
• Mix resin top coat components together with a drill & paddle for at least 1 minute
• Pour content in to a paint scuttle
• Begin painting your flake floor using an roller
• Leave for 3 hours to fully cure - note the top coat will cure much faster than the rest of the system

The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes. 

• This product can NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating. The resin formula is chemically manufactured to work efficiently and effectively based on the exact amounts supplied in full tins for parts A & B
• This product is NOT self levelling.