Resincoat Brewery Floor Coating

Resincoat Brewery Floor Coating is available in a wide range of colours allowing you to bring your brewery unit to life whilst also protecting your concrete surface and speeding up your daily care and maintenance process. To ensure a perfect, glossy finish we recommend use of a primer. We offer different primers for different starting surfaces, so it may be best to speak to our technical team about this before you place your order.

As a general guide we recommend:

Deep Penetrating Primer for Frail/Dusty Concrete Floors or Latex substrates

Epoxy Primer for sound concrete in good condition

Damp Tolerant Primer for new build/recently layed concrete

Oil Tolerant Primer for particularly greasy floors

PLEASE NOTE: The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before becoming unworkable

• This product is NOT UV stable therefore will discolour when exposed to sunlight. Please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.
• This product can NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating. The resin formula is chemically manufactured to work efficiently and effectively based on the exact amounts supplied in full tins for parts A & B
• This product is NOT self levelling
• If you require a clear epoxy coating visit our clear epoxy product here
• The key factors for product adhesion are:
  • Surface Laitance removal
  • Compressive Strength > 25N/mm2
  • Relative Humidity of <85% for 1 coat or <90% for 2 coats of Damp Tolerant Primer
  • Effective DPM underneath the main slab