Epoxy Crack Repair | Concrete Crack Filler | Resincoat
   

Resincoat Epoxy Crack Repair Filler

23 Review(s) 
Resincoat
CTR013
New

Resincoat Epoxy Crack Repair is an ultra strong, pourable epoxy resin liquid crack filler. It is the ideal solution to penetrate, fill and seal fine cracks in concrete, brickwork or stone surfaces. Resincoat Epoxy Crack Repair is most suitable for pourable or pressure injection crack repairs in concrete or brickwork, curing to extremely high strengths. 

 

  • Easy to apply
  • Cures stronger than concrete
  • Extreme durablility
  • Apply over a wide range of temperatures
  • Ideal for cracks up to 2cm deep
  • 100% epoxy 

Download Technical Datasheet

Colour : Clear
Size : 1Kg
Hurry! only 45193 items left in stock.
£32.99

£27.49 ex VAT.

VAT included
Quantity

Add to Wishlist

DIY Friendly Epoxy Crack Repair:

Resincoat Epoxy Crack Repair is ideal for cracks up to 2cm deep. Repairing small concrete cracks can be hugely cost effective in the long run as over time cracks will expand and cause the concrete around them to weaken and possibly become dangerous. This product is suitable for repairing cracks in just about any concrete including; floors, steps, paving and patios. The formula will cure harder than the concrete around it and provide a cost effective waterproof solution that stands the test of time. Ideal for DIY customers the crack filler an be easily poured ensuring a quick and easy repair allowing you to achieve a professional finish with a curing time of under 24 hours. 

 

All our resin products are proudly manufactured in the UK for guaranteed quality and performance.

Coverage Rates:

1kg - Covers maximum 6 metres @ 12 mm wide x 12mm deep

Application Guide

Preparation:

Before use of this product we recommend the area should be vacuumed to remove any loose material or existing debris which could cause the epoxy formula to set unevenly. If the crack is large enough a wire brush should be used to clean out the crack. For a clean application angle grind the crack to achieve a better look, if you suspect the crack runs the complete depth of the epoxy add some kiln dried silica sand to the bottom of the crack to create a bund.

 

Application:

1. Thoroughly mix parts A & B of your epoxy crack repair using a drill and paddle for a minimum of 90 seconds

2. Pour the formula in to the crack distributing it evenly as you go until the crack is filled

3. Once filled allow 12 - 24 hours for the epoxy to fully cure

Please note the formula is also suitable for use with a pressure injection though this may differ on a case by case basis. Should you require further information please call our technical team on 0113 827 2387.

Please note: The pot life of this product is 20 minutes. This is not to be confused with working time. Resincoat crack repair has a working time of approximately 30-40 minutes dependant on ambient temperature.

Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before becoming unworkable 

: CTR013
: 45193 Items
Hurry! only 45193 items left in stock.
New

Data sheet

Appearance
Low viscocity two-part high strength epoxy resin, solvent free
Composition
Clear, Jet Black or Grey
Substrates
Very heavy duty
Product Components
Concrete, cement, stone, brick, tarmac etc.
Typical Installations
Epoxy Resin Filler & Activator
Solvent Content
Solvent Free
Re-coat/Foot-traffic Time (at 20°C)
8-12 Hours
Car-traffic Time (at 20°C)
12-24 Hours
Pot Life
The Pot Life Of This Product Is 20 Minutes
Application Tools
This product can be poured, or applied with pressure injection

Specific References

UPC
500453138393
EAN13
5056489403448

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package

Reviews

Grade 


e

1

Grade 


Great price

Great price for a really good product. Easy to use for quick repairs!

Grade 


Excellent

Product arrived quickly and did the job

Grade 


Quick and easy

Really simple product but amazing results, highly recommended

Grade 


s

Simple and effective

Grade 


Crack repair

Easy to use, delivered quickly, recommended!

Grade 


Good product does the job well.

I mixed the whole tin thinking it was going to be too much, initially it was quite thin and penetrated into the cracks. I found myself going around the cracks and topping them up. A couple of large cracks only stopped draining away after some 30+ mins . The resin became very thick after 45-60 mins, and finished the job very well even the big cracks. Tip use a small pot with a pourer and keep topping it from the can, it will give you more control.

Grade 


DIY friendly

This stuff is the business! Ideal for a DIYer like myself. Managed to repair all cracks in my garage now ready for coating.

Grade 


Quick solution

This was dispatched to us next day after ordering and proved to be a quick solution to a crack in our concrete entry way. many thanks

Grade 


Baker repairs

easy mix/pour, nice product

Grade 


Epoxy concrete filler

Great product, great price thanks resincoat

Grade 


chris

cracks in concrete. mixed and poured, but it kept running away into the crack, so did not fill. had anyone else had this problem?? cant see the depth of cracks. l

Grade 


Crack repair

Strong stuff, never had any issues. Not always easy to match your concrete colour with but does a good enough job to make up for it.

Grade 


Quick & Easy

This is really simple stuff but works wonders, really happy with it and very good quality for the price too

Grade 


Great product for crack repairs -solid recommended

Great product , flows into cracks easily and is very solid , stops water penetrating cracks...
It would be great if you could have more shades ie concrete/mortar colour

Grade 


Great for the price

Works well

Grade 


good price

Impressed with this stuff for the price I would highly recommend it. Does the job and is easy to work with

Grade 


repair

The concrete cracked on our patio and we needed this. Delivery was fast and it worked great

Grade 


Mr

wonderful stuff. harder than the concrete. fast and cheap. Top marks.

Grade 


mr

easy to mix and worked really well, much stronger than stuff I have used before

Grade 


Mr

Mix and pour brilliant

Grade 


Mr

Couldn't be easier I just mixed and poured the product into the cracks. It set hard as granite.

Grade 


crack repair

Amazing stuff. Pours into the cracks and sets harder than the concrete around it.
I'm going to try the epoxy mortar next for the bigger holes.

Write your review

Resincoat Epoxy Crack Repair Filler

Resincoat Epoxy Crack Repair is an ultra strong, pourable epoxy resin liquid crack filler. It is the ideal solution to penetrate, fill and seal fine cracks in concrete, brickwork or stone surfaces. Resincoat Epoxy Crack Repair is most suitable for pourable or pressure injection crack repairs in concrete or brickwork, curing to extremely high strengths. 

 

  • Easy to apply
  • Cures stronger than concrete
  • Extreme durablility
  • Apply over a wide range of temperatures
  • Ideal for cracks up to 2cm deep
  • 100% epoxy 

Download Technical Datasheet

Write your review