copy of Resincoat Garden Fence Paint

Resincoat fence paint has been specially formulated to provide a premium long lasting finish to your shed, fence and other garden wood. DIY friendly the coating can be applied by spray gun or by brush/roller. Designed for vertical surfaces splatter reduction is included for easy application. This thick formulation provides excellent coverage with just 1 coat required to totally transform your fence, easily brightening up your outdoor space. The coating also includes ducks back additives to ensure rain beads on the surface and runs off quicker, ensuring faster drying, less water penetration and better long-term protection.

*Please note there could be a colour variation between batches, please bare this in mind if you are placing another order.  Additionally colour may vary in different areas due to surrounding and light reflecting off the coating. If you have any questions regarding this please call our team on 0330 0570 695.

Coverage rates are approximate & depend upon the substrate.

5L - covers up to 50m²

On wooden surfaces 1 coat should be sufficient. If strong colour change is required 2 coats may be necessary. We always advise 2 coats on cement posts & gravel boards.

Preparation:

Before applying our coating ensure your surface is dry, clean and free from any dust and debris. If it has been previously coated, loose, flaking paint should be stripped back to bare wood. Test a small area first for colour and adhesion.

Application:

Brush/Roller:
Stir the product thoroughly, before and during use. Brush or roller the product evenly along the grain of the wood. 

Spray Gun:
Stir the product thoroughly, before pouring contents into your chosen spray gun. The formula should be diluted down with up to 10% water. Refer to the sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

Resincoat fence paint should be touch dry within 4 hours. Once coat 1 has been applied, leave to dry & repeat for coat 2 if required.

Cement posts & gravel boards will always need 2 coats.