Resincoat Sample Outdoor Patio Paint

​

Preparation:

Important pre-requisites:

• Apply only in dry conditions - ideally the coating should avoid rainfall for 2 days where possible. 7 days should be allowed before jet washing.
• 2 - 3 coats is recommended.
• Surface must be washed and then allowed to fully dry before application.
• Suitable etching formula should be used such as Resincoat Etch & Clean.
  
• Due to the amount of variation in patio substrates, we highly recommend applying to a small test area first to ensure a perfect bond and desired finish.

Application:

We recommend the weather be dry & warm whilst applying this product but not overly humid.

1. Ensure you have used Etch & Clean

2. Stir the paint thoroughly before use. 

3. Begin applying the paint using a brush or roller. Please note the paint should be applied thinly. 

4. Once the first coat has been applied leave to dry. Your brush or roller can be cleaned in tepid water ready to be reused for subsequent coats.

5. Apply your second coat.

6. Leave to dry & apply a third coat if required.