Cutting in Pack
   

Cutting in Pack

CP001
New

Resincoat Cutting in Pack is a small handy pack for cutting in or edging your floor paint project. Ideal for cutting in the edges of your floor without activating your larger tins of epoxy paint.

 

Kit Contains:

  • 1 x 1kg Relevant Primer
  • 2 x 1kg Epoxy Garage Floor Paint
  • 3 x Paint Brushes
  • 3 x Roller Sleeves
  • 1 x 4inch Roller Frame 

 

Coverage:

One Cutting in Pack will cover approximately 3-4m²

 

We will provide paint colour and primer to match your existing order. For other options please contact us and we can prepare accordingly.

Type : Frail / Dusty Concrete
Colour : Mid Grey (Silver Grey)
Anti-Slip Profile : None
Hurry! only 986 items left in stock.
£72.59
VAT included
Quantity

Add to Wishlist

This product has been designed as an add on to our bundle packages, ideal for DIYers to easily transform their garage floor. 

Application Guide

Preparation:
Before applying our garage floor paint we advise that you vacuum the area. Old paint finishes should be removed if flaking at all and if well bonded, abraded and sanded to create texture prior to applying the paint. Preparing the floor mechanically (shot blasting or grinding) is always advisable but if that is not possible then our Etch and Clean is a good alternative.

Please see below for the best primer for your floor:
• For new concrete floors prime with Resincoat Damp Tolerant Primer
• For dusty or old floors prime with Resincoat Deep Penetrating Primer
• For greasy floors with oil residue clean thoroughly scraping off any dust or dirt and prime with Resincoat Oil Tolerant Primer

Application:
We advise when applying this product the ambient temperature is at least 7°C. Please note for 2 coats you will require 2 epoxy rollers.

1. Pour 100% of your part B tin in to part A
2. Mix resin components together with a drill and paddle for 1 minute
3. Pour content in to a paint scuttle
4. Immediately begin applying your paint with an epoxy roller frame and sleeve
5. Use a brush around the edges for a smooth finish (a second pair of hands comes in useful)
6. Once coat one has been applied leave 12-24 hours then apply second coat
7. Once complete wash equipment in warm soapy water

PLEASE NOTE: The pot life of this product is 20 minutes. This means the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for 40 minutes. 

Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before becoming unworkable

Useful Information:

• This product is NOT UV stable therefore will discolour when exposed to sunlight. Please coat with Resincoat UVR coating for a UV stable finish.
• This product can NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating. The resin formula is chemically manufactured to work efficiently and effectively based on the exact amounts supplied in full tins for parts A & B
• This product is NOT self levelling.

: CP001
: 986 Items
Hurry! only 986 items left in stock.
New

Specific References

UPC
500596581964
EAN13
5005953131479

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33
Product added to compare.