DESCRIPTION
The Double Garage Floor Bundle is the perfect kit for you to achieve the showroom finish at home or in your car garage/repair shop, etc. Our epoxy resin gives a stunning high gloss finish that is seen in some of the world’s greatest car manufacturers. The professional gloss finish will create the perfect setting for you to showcase your car along with excellent durability. Proudly manufactured in the UK by us all our epoxy resin products offer guaranteed quality and performance. Our high build formula will not flake or peel like cheaper alternative when exposed to hot tyres or high volumes of traffic.
Available in a great choice of colour options this double garage floor paint bundle can be tailored to your home or workplace. It is easy to apply making it a perfect choice for DIY users with no specialist equipment required. The paint cures in 24 hours, this means that there is little disruption to day-to-day processes. Ideal for homeowners, car garage, auto repair centres and more this bundle is a cost effective solution whilst offering a high quality finish.
KIT QUANTITIES
See below the exact quantities for each product that is supplied in our double garage floor paint kits:
| 30m2 Kit Contains |
40m2 Kit Contains |
| 1 x 2.5kg Primer |
2 x 5kg Primer |
| 1 x 5kg Primer |
4 x 5kg Epoxy Garage Floor Paint |
| 2 x 2.5kg Epoxy Garage Floor Paint |
1 x Roller Frame |
| 2 x 5kg Epoxy Garage Floor Paint |
3 x Roller Sleeves |
| 1 x Roller Frame |
1 x Paint Scuttle |
| 3 x Roller Sleeves |
1 x Mixing Paddle |
| 1 x Paint Scuttle |
3 x Paint Brushes |
| 1 x Mixing Paddle |
1 x Pair of Disposable Gloves |
| 3 x Paint Brushes |
|
| 1 x Pair of Disposable Gloves |
|
APPLICATION GUIDE
Preparation
Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Double Garage Floor Paint Bundle. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet.
Please note: Etch and Clean is only suitable for use on bare concrete.
Priming
• For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer
• For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer
• For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer
Application
We advise when applying this product the ambient temperature is at least 7°C.
1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.
2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.
3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.
4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).
5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.
6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).
PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes.
Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before it becomes unworkable
USEFUL INFORMATION
• Roller sleeves should be used once per coat, two coats will require two roller sleeves.
• This product is NOT UV stable therefore can discolour when exposed to regular sunlight. For areas with plenty of repeated sunlight, please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.
• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.
• This product is NOT self levelling.
• If you require a clear epoxy coating visit our clear epoxy product here.
• Please note: all Resincoat Bundles are sold as complete sets, individual units may not be returned or refunded.
English
English GB
