Resincoat Pre Grout Porcelain Tile Protector

Preserve Your Porcelain Tiles with Resincoat Pre Grout Porcelain Tile Protector

Unlock the power of Resincoat Pre Grout Porcelain Tile Protector, a water-based defence crafted to shield textured porcelain tiles from stubborn stains caused by cement, grout, and organic substances. Ideal for DIY enthusiasts, this innovative solution not only facilitates easy grout release during installation but also ensures long-term protection against future staining. With its universal compatibility across all textured porcelain tiles, this protector simplifies maintenance, allowing your tiles to maintain their original beauty and durability for years to come.

Coverage Guide

See below approximate coverage guide for a 5 litre bottle.

Lower porosity surfaces: 150m²

Application Guide

Preparation:

Ensure the surface is completely clean, dry, and free from dirt, grime, cement, and grout. If necessary, scrub the surface with a white nylon pad to remove any residues. Rinse thoroughly and allow the surface to dry completely before application.

Application:

1. Shake the bottle of Resincoat Cement, Grout & Salt Residue Remover well before use.

2. Apply evenly to the surface using a broad paint brush, foam roller, or light pressure sprayer before grouting.

3. Allow the first application to dry for 30 minutes.

4. Apply a second coat of the remover.

5. Leave the surface to cure for a minimum of 1 hour before grouting or pointing.

6. Once pointing is dry and residues are removed, apply a further coat of protector, covering the joints as well.