Polyurea Movement Joint Sealant | Resincoat
   

Resincoat Polyurea Joint Sealer

Resincoat
CMJ011
New

Resincoat Polyurea Joint Sealant is a high quality, flexible polyurea sealer that can easily fill joints and cracks in concrete and other surfaces. Fast curing make it ideal for applications that rely upon a quick turnaround. This sealant works well in adverse temperatures & is highly flexible allowing slab movement, yet strong enough to prevent spalled joints under heavy pressure.


This product requires the following application gun:
Dual Cartridge Application Gun

 

  • Easy gun application
  • Quick initial cure time (around 5 minutes)
  • Low VOC & Solvent Free
  • Cures in temperatures from -25 to +54°C
  • Great chemical resistance
Hurry! only 4713 items left in stock.
£50.59
Tax included
Quantity

Add to Wishlist

Flexible Polyurea Joint Sealer

Resincoat Polyurea Joint Sealant is a self-levelling and very hard wearing rapid curing polyurea joint sealant material. Initial cure can be as quick as 5 minutes, enabling light levels of traffic as quickly as within 30 minutes. This allows you to complete time critical jobs and reopen the job site to traffic just thirty minutes after application in most conditions. The smooth grey sealant is easy to use ensuring a professional finish that will last for many years. This item is highly flexible retaining full properties and memory capability while allowing normal joint movement, as well as accommodating to slab movement where designed movement will occur.

Resincoat Polyurea Joint Sealant is regularly used on a range of factory and warehouse floors including loading bays, cold storage rooms and productions zones. It also has good chemical resistance and can be painted over allowing you to blend it seamlessly in to any environment. This product is suitable for both indoor and outdoor use, maintaining its physical properties providing a hard wearing design.

Coverage Rates

per 400ml. Dual Cartridge:

Approx. 3800mm in linear length for 5mm x 20mm joint.

Coverage can vary dependent on surface porosity, type and existing condition.

Application Guide

Preparation – 
Clean the existing joint of debris and contaminants, such as oils, loose materials, dirt, rubber etc, to allow for good adhesion of the product. Expose clean rough concrete for best results. Ensure when applying this product the area is dry.

Application -
1.Shake cartridge prior to all applications and each time it is used for a minimum of 1 minute

2. Remove air from system - Prime cartridge by removing retaining nut and slowly dispensing product from cartridge into the mixing nozzle.

3. Discard a small amount of product prior to application. Ratio may be slightly off when initial product travels through static mixer.

4. Once uniform mixture is observed, product is ready for application.

5. Fill in joints with the sealer 

6. Allow to cure (usually 5 – 10 mins)

Do not apply to wet or damp substrates. Excessive moisture may cause bubbles or uneven reaction.

: CMJ011
: 4713 Items
Hurry! only 4713 items left in stock.
New

Specific References

UPC
500000892372
EAN13
5056489497621

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33

You might also like

Product added to compare.