UberSeal Anti-Condensation Paint | Anti-Mould | Resincoat
   

UberSeal Anti-Condensation Paint

AMP005

UberSeal Anti-Condensation Paint is engineered to reduce the presence of condensation. By incorporating hollow glass micro-beads, thermal energy is deflected from the wall hindering moisture accumulation, in turn reducing mould growth.

 

    • Walls resist condensation 60% longer for enhanced protection
    • Retains efficacy even when applied under paint and wallpaper
    • Inhibits black mould and harmful fungi formation effectively
    • Environmentally friendly with antibacterial properties for safer use

  

Size : 2.5 Litres
Hurry! only 488 items left in stock.
£32.67
£36.30
Save 10%
Tax included
Quantity

Add to Wishlist

UberSeal Anti-Condensation Paint

UberSeal Anti-Condensation Paint is a water-based, styrene copolymer dispersion that combats condensation when applied to your walls. This innovative paint employs hollow glass micro-beads capable of reflecting ambient thermal energy, repelling warm air back into the room and thus, preventing wall moisture accumulation.

The micro-beads demonstrate an impressive crush strength of 500psi and work by elevating internal wall temperatures, which in turn alters the dew point, significantly delaying condensation formation by up to 60%. This shift ensures robust protection against dampness and mould. Furthermore, the paint's compatibility with overpainting allows for design flexibility without sacrificing the protective benefits it offers.

Please note: our paint is suitable for application on metal and plastic surfaces, as well as over existing paint, wallpaper, plaster, brick, and concrete. However, conducting a preliminary application test is always advised to ensure the outcomes meet your expectations.

 

COVERAGE

2.5L: 10-12.5m²

5L: 20-25m²

Please note: the above coverage rates are per coat, in most cases we advise 2 coats, and is dependant on the porosity of the surface.

 

APPLICATION GUIDE

Preparation

Make sure the surface is clear of mould and fungus by cleaning any affected spots with our UberSeal Mould Wash. Remove any loose paint, wallpaper, grease or oil stains, along with any other finishes. Make good any cracks with crack filler, allowing them to fully dry before beginning the application.

 

Application

  1. Stir the paint thoroughly before use. Please note: hand-stirring is required, the use of mechanical stirring, such as a drill and paddle, could cause damage to the micro-beads.
  2. Apply your first coat with a brush or roller (start at the corner of painting area and working inwards).
  3. Leave to dry for between 2 to 4 hours.
  4. Apply your second coat (two coats are recommended).

 

USEFUL INFORMATION:

  • DO NOT: apply in temperatures below 5°C or on frozen surfaces.
  • Please note: it is possible for you to wash your tools, brushes and rollers with warm, soapy water once you have completed your project.
: AMP005
: 488 Items
Hurry! only 488 items left in stock.

Specific References

EAN13
5056771733819

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33
Product added to compare.