UberSeal Fillet Seal | Waterproofing | Resincoat
   

UberSeal Fillet Seal - 25kg

TNK004

A high-quality, cement-based, fast-setting mortar designed by UberSeal to create fillet joints at areas of vulnerability, such as the junction between wall and floor.

 

    • Capable of applying complete surface layers up to 20mm thick.
    • Effortlessly fills cracks and indentations in a single application up to 50mm deep.
    • Rapid strength development for quick project progression.
    • Non-shrinking fillet seal that sets without any cracks.

  

Hurry! only 463 items left in stock.
£39.80
£44.22
Save 10%
Tax included
Quantity

Add to Wishlist

UberSeal Fillet Seal

A premium cement-based, quick-hardening mortar, UberSeal Fillet Seal is engineered to construct fillet joints at structural weak spots of waterproofing projects. It's ideal for reinforcing stress areas, including wall-to-floor and wall-to-wall junctions, and would typically be used in conjunction with UberSeal Tanking Slurry for robust and effective waterproofing.

Our Fillet Seal ensures a seamless transition between horizontal and vertical surfaces, minimizing the chance of any gaps during structural waterproofing. Additionally, it serves as an efficient repair mortar, quickly addressing and mending areas of damage, filling deep mortar joints, and smoothing out uneven surfaces making it even more versatile.

 

COVERAGE RATES

25kg: up to 1.4m² which would translate to up to 10 linear metres (at a thickness of 20mm).

Please note: Coverage is dependent on porosity and type of substrate.

 

APPLICATION GUIDE

Preparation

Active water leaks should be addressed with UberSeal Waterstop (a rapid-setting plugging compound) before applying the UberSeal Fillet Seal. Surfaces requiring levelling, filling, or repairs should be clean and cleared of any loose materials and debris. For any localised repairs: create a clean, square edge by cutting back the repair area's boundaries.

 

Priming

Mix UberSeal SBR Additive with clean water at a 1:1 ratio (by volume). Apply the mixture onto the surface using a roller, brush, or spray. Wait for 30 minutes until the primer feels tacky to the touch.

 

Application

  1. Pour 3 - 4 litres of clean water into a suitable mixing vessel.
  2. Using a Mortar Drill and Paddle, slowly start to add 100% of the powder into the bucket. Do this slowly to prevent dust generation. Slowly increase the drill speed and mix for 1 - 3 minutes, ensuring all powder is incorporated.
  3. If needed, slowly incorporate water and mix to achieve the desired consistency, adding no more than 1 litre maximum. Please note: Adding more water than recommended will compromise the strength and diminish the waterproofing capabilities of the fillet seal.
  4. Apply the material at the base of the wall and create a fillet using a trowel or fillet tool.
  5. Full surface layers can be applied up to 20mm thick.
  6. In areas of high stress concentration at wall/floor joints, use a diluted mixture of UberSeal SBR Additive at a ratio of 1:2 with water (by volume) as a gauging solution.
: TNK004
: 463 Items
Hurry! only 463 items left in stock.

Specific References

EAN13
5056771733499

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33
Product added to compare.