Resincoat Pinhole Repair | Resincoat
   

Resincoat Pinhole Filler

Resincoat
PHR001

Resincoat Pinhole Filler is an ultra-strong, lightweight multi-functional repair filler ideal for repairing small cracks, blemishes and pinholes in concrete, screeds, self-levelling layers, metals and resin coatings. Easy to use, the product cures quickly to high strengths while remaining easy to sand and abrade for further coating.

 

  • High resin content

  • Lightweight & smooth

  • Easy to mix, use & apply

  • Good adhesive strength

  • Specially formulated for easy sanding

  • DIY friendly

 

All our resin products are proudly manufactured, tested and packed by Resincoat in the UK to the highest ISO9001 standards.

Size : 900ml
Hurry! only 398 items left in stock.
£58.29
Tax included
Quantity

Add to Wishlist

DESCRIPTION

Resincoat Pinhole Filler is an off-white paste designed to fill pinholes, repair surfaces with grind marks and low spots, and address minor imperfections. Its high resin content ensures a less porous finish, reducing paint absorption and enhancing durability. With its low viscosity, this product effortlessly flows into small pinholes, making it easier to achieve a seamless repair. Suitable for various surfaces, Resincoat Pinhole Filler offers excellent adhesion and blends seamlessly with surrounding areas. Trust in its superior quality and performance to transform imperfect surfaces into flawless works of art with ease.

 

APPLICATION GUIDE

Preparation

Before using Resincoat Pinhole Filler, we recommend the area be thoroughly vacuumed to completely remove any loose material or existing debris which could cause the filler to set unevenly. Clean and degrease the area and then abrade with medium grit paper. Finish with a final clean to remove any of the dust left by the sandpaper ready for application.

 

Application

1. Dispense a 10cm puddle of part A onto a suitable mixing surface (clean scrap plastic or a ceramic tile are ideal). 

2. Measure a single 10 cm ribbon of part B across the puddle before mixing. 

3. Using the included spreader, mix thoroughly in a figure of 8 motion to ensure a homogeneous and uniform colour mixture is achieved. Follow mix ratio carefully (ensuring you do not under or over catalyse).

4. Begin applying the product to the repair site. Apply with a pressing action to reduce air entrapment.

5. Leave to dry for 20 minutes then begin sanding.

 

PLEASE NOTE: The pot life of this product is 4 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 6 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

: PHR001
: 398 Items
Hurry! only 398 items left in stock.

Specific References

EAN13
5056771725371

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33
Product added to compare.