Resincoat Fast Cure Crack Repair Filler
   

Resincoat Fast Cure Epoxy Crack Repair Filler

Resincoat
CTR051
New

Resincoat fast cure epoxy crack repair filler is the ideal solution for rapid repairs to cracks. This high strength formula is easy to apply with its DIY friendly pourable design, resulting in fine cracks and small voids being quickly repaired. Boasting a rapid 4 hour cure time, this product is great for repairs that require a quick turnaround. Use year round this product offers a high quality, professional finish. 

    

  • Rapid 4 hour cure time

  • Cures stronger than concrete

  • Ideal for quick repairs

  • DIY friendly

  • Cures in cold temperatures

  • High quality UK manufactured resin

Colour : Jet Black
Size : 1Kg
Hurry! only 414 items left in stock.
£32.99
Tax included
Quantity

Add to Wishlist

DESCRIPTION

Due to its fast curing properties, Resincoat Fast Cure Epoxy Crack Repair Filler can be applied all year round, making it an ideal solution for even Winter repairs. DIY friendly, the product is exceptionally easy to use, allowing for quick repairs with a professional finish. This crack repair formula is incredibly durable, offering permanent repairs to hairline cracks and small voids in concrete. Suitable for cracks up to 12mm deep. The fast cure crack repair can provide seamless repairs resulting in a high quality finish. Our fast cure resin is proudly manufactured by us in the UK, boasting a high strength and attractive  finish that will last for many years.

 

COVERAGE RATES

Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

1kg: Will cover a maximum of 6 metres at a depth and width of 12mm

CURING TIMES

Compared to our standard Resincoat Epoxy Crack Repair Filler, curing times are much more reduced for a quicker turnaround:

  • 4 hours @20°C
  • 6 hours @10°C
  • Can be used down to around 0°C with extended cure time.

 

Full chemical cure at 5 days.

 

APPLICATION GUIDE

Preparation

Before using Resincoat Fast Cure Epoxy Crack Repair Filler, we recommend the area be thoroughly vacuumed to remove any loose material or existing debris which could cause the epoxy formula to set unevenly. If the crack is large enough, a wire brush should be used to clean out the area. For a clean application, angle grind the crack to achieve a better look. If you suspect the crack runs the complete depth of the epoxy add some kiln-dried silica sand to the bottom of the crack to create a bund.

 

Application

We advise when applying this product the ambient temperature is at least 7°C.

1. Pour 100% of Part B into the Resincoat Epoxy Crack Repair Filler Part A tin. Thoroughly mix using a drill and paddle for a minimum of 90 seconds, until a uniform colour and texture is achieved.

2. Pour the formula into the crack, distributing it slowly and evenly as you go until the crack is filled.

3. Once filled, allow for the epoxy to fully cure.

 

PLEASE NOTE: The pot life of this product is 15 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 20 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

 

USEFUL INFORMATION

• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

• Please note: the formula is also suitable for use with a pressure injection though this may differ on a case by case basis. Should you require further information please call our technical team on 0330 0570 695.

: CTR051
: 414 Items
Hurry! only 414 items left in stock.
New

Specific References

UPC
500674168315
EAN13
5056489454570

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33
Product added to compare.