Covid-19 Resistant High Performance Epoxy Coating

DESCRIPTION

Effective Against Coronavirus

Resincoat Anti-bacterial Epoxy Floor Coating has been certified to viral ISO standards to be effective against the SARS-Cov-2 virus. It has been independently tested by a leading UK microbiological testing laboratory with the results stating that our coating is effective against Coronavirus. The product aids cleaning processes by killing ≥70% of coronavirus between cleans, as well as helping to prevent the spread of coronavirus by continually killing throughout the day. The coating can be used to safeguard any environment such as manufacturing facilities, hospitals, doctors’ surgeries, dentists, vets or any other environment to help reduce the spread of the virus. Highly durable the coating is ideal for highly trafficked areas and can withstand heavy foot and vehicle traffic as well as being easy to clean and maintain. Available in a wide range of colour the antibacterial floor paint boasts a high gloss finish that is aesthetically pleasing.

Antimicrobial Epoxy Floor Paint

Our coating is both anti-bacterial and anti-microbial meaning it can prevent the growth of or destroy a wide range of microbes such as bacteria, fungi and mould, an antibacterial specifically prevents the growth of bacteria. The coating provides a hygienic, safe environment protecting against MRSA as well as VRE. This high performance coating has been formulated by our chemists to provide an incredibly long lasting design. We proudly manufacture all coatings in our UK factory & are ISO 9001 certified.

How does Resincoat Covid-19 Resistant floor paint kill the virus?

The below diagram demonstrates how the antimicrobial technology prevents spread on a floor coated with Resincoat Covid-19 Resistant floor paint.

COVERAGE RATES

Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

1kg: 3-4m²

2.5kg: 8-10m²

5kg: 17-20m²

10kg: 35-40m²

Please note: the above coverage rates are per coat, in most cases we advise 2 coats.

APPLICATION GUIDE

Preparation

Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Covid-19 Resistant High Performance Epoxy Coating. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Etch and Clean is only suitable for use on bare concrete.

Priming

• For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer

• For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer

• For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer

Application

We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.

6. The cured final coat is ok for foot traffic. Cars and heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).

PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

USEFUL INFORMATION

• Roller sleeves should be used once per coat, two coats will require two roller sleeves.

• This product is NOT UV stable therefore can discolour when exposed to regular sunlight. For areas with plenty of repeated sunlight, please coat with a coloured UVR coating such as Resincoat Chemical Resistant UVR Floor Coating for a UV stable finish.

• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

• This product is NOT self levelling.

• If you require a clear epoxy coating visit our clear epoxy product here.