Resincoat Liquid Rubber Roofing 20m² Bundle
   

Resincoat Liquid Rubber Roofing 20m² Bundle

LQR001
New

Resincoat Liquid Rubber Roofing 20m² Bundle gives you everything you need to protect, seal and waterproof your felt, sheet metal or wood roof in one DIY friendly kit. Highly cost effective this system is much cheaper than alternative repairs and boasts an incredibly durable design. Ideal for any single garage roof repair the bundle contains the latest in liquid rubber technology as well as everything you'll need to apply including rollers, geotextile tape and mixing equipment.

 

  • Immediate waterproofing for Single Garages

  • Complete DIY kit

  • Single coat solution

  • Unmatched durability

  • Highly cost effective

  • Tackles the toughest of leaks

Hurry! only 390 items left in stock.
£329.99
Tax included
Quantity

Add to Wishlist

Immediate and Lasting Waterproofing for Single Garages

This liquid rubber waterproof repair product can successfully seal gaps between roofing sheets or small holes around skylights, chimneys and other roof accessories. This highly advanced system provides a fully bonded repair with excellent insulating properties providing a completely seamless waterproof finish. Ideal for emergency flat roof repairs or general maintenance this liquid rubber is great for repairing leaks or cracks on any flat roof. A single layer application can successfully repair your flat roof boasting a highly durable long lasting finish. 

Its liquid consistency makes it extremely easy to work with ideal for both DIY & industrial users. The product is extremely flexible and can be used on both horizontal and vertical surfaces.  The coating will reach every crack no matter how large or small and offers a black appearance when dry. The movement of the roof through expansion, contraction and vibration will not affect the integrity of this product. Resincoat liquid rubber is UV stable therefore can be used outdoors without the worry of fading or discolouring.

 

Kit Quantities

  • 4 x Resincoat Liquid Rubber Waterproof Coating 5L 
  • 1 x 50m Resincoat Geotextile Tape
  • 1 x Roller Frame
  • 1 x Paint Scuttle
  • 1 x Mixing Paddle
  • 1 x Roller Sleeves
  • 2 x Paint Brushes
  • 1 x Disposable Gloves

 

Coverage Rates

Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

1 Litre: 1m²

Please note: the above coverage rates are per coat and, whilst Resincoat Liquid Rubber Waterproof Coating should require only one coat, it is dependant on the porosity of the surface.

 

Application Guide

Preparation

Before application of this product, thoroughly clean the surface of the roof to ensure that it is completely free from dust, dirt, oils, surface flaking, poorly bonded or glossy paint, sealers, varnishes, salts or any other contaminants. Any damaged surfaces must be fully repaired prior to application. Please note: your surface must be completely dry before application of this product, it cannot be applied on wet or damp surfaces. 

Whilst a primer is typically unnecessary, highly porous/friable surfaces may require the use of a primer before coating with this product. We advise an inspection be carried out an adhesion test on any existing porous surface or substrate prior to application of the coating.

 

Surface Preparation with Geotextile Tape

All joints, seams, cracks, vents, etc must be bridged with Resincoat Geotextile Scrim Tape, as per the instructions. All joints, e.g. of torch-on membrane, sheet metal, vertical and horizontal transitions, must be additionally reinforced with Geotextile at a 10-15 cm width.

Application of Geotextile Tape

Geotextile tape is embedded into the wet liquid rubber coating avoiding creasing. Adjacent lengths of the reinforcement must overlap by 75mm. Finish with one coat of liquid rubber waterproof coating to seal the tape. Apply Geotextile tape:

  • to all areas which can be bonded.
  • must be used on all upstands, curves, skylight bases and rainwater outlets.
  • must be used on all gutter expansion joints.
  • must be used on all repaired areas.

 

Application

Do not apply below 2°C or in freezing conditions. Application temperature should ideally be between 5°C-25°C.

1. Ensure that the surface you're working with is completely dry before application.

2. Stir the product thoroughly before use, ensuring that it is uniform throughout. 

3. Begin applying the coating to your surface, using either a brush or a roller as you would a normal layer of paint.

4. One layer should be sufficient, but do inspect the final product before considering any further required coats.

5. Leave to fully cure. This should take up to 8 hours or overnight depending on temperature and conditions. A full cure usually takes up to 7 days.

 

Useful Information

• This product is NOT self levelling.

• Not for use on: tanking, fishponds, lead, plastisol coated substrates or internal use.

• Please note: all Resincoat Bundles are sold as complete sets, individual units may not be returned or refunded.

• Product can be cleaned with white spirit and a cloth.

: LQR001
: 390 Items
Hurry! only 390 items left in stock.
New

Specific References

UPC
500005504300
EAN13
5056489401567

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33
Product added to compare.