Resincoat Deep Penetrating Epoxy Primer
   

Resincoat Deep Penetrating Epoxy Primer

Resincoat
HOM030
New

Resincoat Deep Penetrating Epoxy Primer is for use on damaged, friable and weak floors or where deep penetration of the substrate is required to act as a barrier. This primer is specially formulated to go into the substrate and bind the weak cementitious material together before adding a top coat. 1 coat is sufficient prior to using one of our paint finishes. For very weak floors, which may need deeper penetration, please see our Heavy Duty PRS Penetrating System.

 

  • Easy to use

  • Excellent sealing properties

  • Suitable for a wide range of surfaces

  • Superb coverage rates (20+ sqm /5kg)

Size : 1Kg
Hurry! only 4810 items left in stock.
£42.66
Tax included
Quantity

Add to Wishlist

DESCRIPTION

Why choose a deep penetrating primer?

Deep penetrating primers are perfect for strengthening your existing surface; the formula will absorb deeply into the surface, effectively reducing its porosity and providing a thorough seal, thus preparing it impeccably for a flawless application of a top coat of paint. Should you have any additional queries regarding specific substrates, please do not hesitate to contact our dedicated sales team on 0330 0570 695, and they will be more than happy to offer you comprehensive and tailored advice.

 

COVERAGE RATES

Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.

1kg: 3-4m²

2.5kg: 8-10m²

5kg: 15-20m²

10kg: 35-40m²

Please note: the above coverage rates are dependant on the porosity of the surface.

 

APPLICATION GUIDE

Preparation

Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Deep Penetrating Epoxy Primer. When preparing for a floor coat, doing so mechanically (shot-blasting or grinding) is always advisable for best results, but if that is not possible then sanding the area or our Etch and Clean is a good alternative. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet. 

Please note: Etch and Clean is only suitable for use on bare concrete.

  

Application

We advise when applying this product the ambient temperature is at least 7°C.

1. Mix Part A on its own with a mixing paddle attached to an electric drill for about 1 minute before adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.

2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.

3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.

4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).

5. As soon as the primer has started curing (is no longer tacky to touch) you apply your first coat of paint; this should take 8-12 hours.

6. The cured final coat is ok for foot traffic after 12-24.

 

PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes. 

Pot life = Time to harden in pot following addition of hardener

Working Time = Time to apply product before it becomes unworkable

 

USEFUL INFORMATION

• Roller sleeves should be used once per coat, two coats will require two roller sleeves.

• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.

• This product is NOT self levelling.

: HOM030
: 4810 Items
Hurry! only 4810 items left in stock.
New

Specific References

UPC
500644185014
EAN13
5056489465682

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33

You might also like

Product added to compare.